TEL: 0086-511-88229828 EMAIL: info@santacc.com

Heat exchanger

Type: steam heat exchanger, tube/plateheat exchanger

Steam heat exchanger

Steam heat exchanger are used for raising temperature of well effluents to prevent hydrate formation, reduce viscosity and break down emulsions for efficient separation of oil and water. It consists of high-pressure and low pressure split-flow coils located upstream and downstream of an adjustable choke, contained within a steam filled vessel.

Order online

Product Details

Heat Exchanger


Type: steam heat exchanger, tube/plateheat exchanger


Steam heat exchanger

Steam heat exchanger are used for raising temperature of well effluents to prevent hydrate formation, reduce viscosity and break down emulsions for efficient separation of oil and water. It consists of high-pressure and low pressure split-flow coils located upstream and downstream of an adjustable choke, contained within a steam filled vessel.

Application: offshore and onshore operations, well cleanups, production/well testing. Service under sour, crude oil, mud, gas service conditions.

Features:

-Insulation aluminum/stainless steel jacket for heat preservation.

-Check valve on steam inlet to avoid steam returing.

-Steam trap on condensate return C/W water exhaust port to prevent freezing

-Safety shutdown for high temperature

-safety shutdown for vessel high pressure

Design and manufacturespecification: SME VIII div1, NACE MR0175, ASME B31.3, API-6A, DNV2.7-3。


Heat exchanger-Tuber/plate

Material: SA516-60, SA516-70, Q345R (HIC, SSC as required) , Stainless steel grade for 304, 304L, 316L, 321, 309, 625, 2205,2507, as well as cladding plate.

Design and manufacture: ASME, GB150, Petrobras and European and American standards standards Etc.

Project case:

1.jpg

High Pressure Heat Exchanger for CNOOC Lingshui Project

Export Project Experience:

Kazakhstan - Aktobe Joint Petroleum Machinery Co. LTD

Jordan Refinery Electrical Desalination And Ancillary Systems Project

Sino Gas & Energy Holdings Limited


Domestic Project Experience:

CNOOC 32-6 Operation Company

QHD 32-6 project of Qinhuangdao operation branch of CNOOC (China) Co., LTD

Shaanxi Coal Chemical Group Shenmu Tianyuan Chemical Co. LTD

Lingshui project of Offshore Oil Engineering Co., LTD


1.jpg

Heat exchanger skid of CNOOC Lvda 5-2N offshore platform


COOEC lingshui 17-2 Marine platform high pressure heat exchanger 2 sets

1.jpg

1 slug flow inlet heat exchanger TS-E-1510 (DN900mm×4000mm)

Design pressure: 12.15MPa, design temperature: -20 ℃

Delivered in July/August of 2020

1.jpg

Slug flow inlet heat exchanger TS-E-1520 (DN700mm×2200mm) 1 set, BEU

Design pressure: 12.15MPA, design temperature: 49℃

Delivered in July/ August 2020


COOEC lingshui 17-2 Marine platform high pressure heat exchanger 5 sets

1.jpg

1st stage production separator Inlet heat exchanger 1 set TS-E-2020(DN800mm×6400mm)

Design pressure: 18.75MPA, design temperature: 100℃~-19℃

Delivered in Dec. of 2019

1.jpg

Low temperature Liqiud/gas heat exchanger TS-E-2820(DN700mm×6000mm) 2 sets

Design pressure: 12.15MPA, design temperature: 74℃~-54℃

Delivered in Dec. of 2019

1.jpg

TC-WS-2750(DN700mm×3350mm) 1 set (fixed tube-plate type, duplex stainless steel)

Design pressure:12.15MPa, Design temperature:150~-19℃

Delivered in Dec. of 2019

1.jpg

Yulong Petrochemical 1#1.5 million tons ethylene plant  low-pressure steam generator for emergency oil cooling

2.jpg

Yulong Petrochemical 1#1.5 million tons ethylene plant One section of aftercooler

Previous:Slug Catcher

Next:Pig launcher and receiver